Prestige Group - Prestige Sector 150 NoidaAuthorised Seller
Prestige Group - Prestige Sector 150 NoidaAuthorised Seller

RERA Registration Under Process · EOI Only

An architect measuring a residential floor plan with a ruler - the drawing where carpet area and super built-up area part ways

Buying Guide

Super Built-Up Area vs Carpet Area

RERA definitions, the loading factor and the real price per usable sq. ft. – worked through with Sector 150 Noida numbers.

Super Built-Up Area vs Carpet Area: What You Actually Get in Sector 150 Noida

Every price in Noida is quoted per sq. ft. The question buyers forget to ask is: which sq. ft.? A 2 BHK advertised at 1,303 sq. ft. doesn’t give you 1,303 sq. ft. to live in. Part of that figure is your share of lobbies, lifts and the clubhouse.

This guide explains super built-up area vs carpet area in plain terms. It shows how loading works in NCR today and walks through the maths using real Sector 150 prices, so you can work out what you’re really paying for each usable sq. ft.

Carpet Area vs Built-Up Area vs Super Built-Up Area

Layer 1

Carpet area is the floor space inside your home. RERA defines it precisely. Under Section 2(k) of the Act, carpet area means the net usable floor area of an apartment, excluding the area covered by external walls, areas under services shafts, exclusive balcony or verandah area and exclusive open terrace area, while including the area covered by internal partition walls. (TaxGuru) (Godrej Capital)

Layer 2

Built-up area adds the walls. A simple way to remember it: Built-up Area = Carpet Area + Area of Walls. Many brochures also add balconies to this figure. (TaxGuru)

Layer 3

Super built-up area adds your share of everything you use but don’t own alone: Super Built-up Area = Built-up Area + Common Areas. That covers common areas such as elevators, lobbies, staircases, clubhouses, amenities, and terraces. In NCR it’s often called saleable area. (TaxGuru) (ANAROCK data via NBM&CW)

Super built-up area

= Built-up area + your share of common areas

  • Lobbies
  • Lifts
  • Staircases
  • Clubhouse
  • Amenities
  • Shared terraces

Built-up area

= Carpet area + area of walls (many brochures add balconies)

Carpet area (RERA)

The net usable floor inside your home, including internal partition walls. The only layer you can furnish.

Each outer layer adds area you pay for per sq. ft. Only the innermost one is floor you live on.
Watch: the three areas explained with a drawn floor plan. “Carpet area, Built Up Area, Super Built Up Area as per RERA” by Engineering Motive on YouTube, an independent channel not affiliated with this site. Watch on YouTube

RERA Carpet Area Is Not the Old “Carpet Area”

Before RERA, “carpet area” meant different things to different builders. RERA fixed one definition, and it’s slightly more generous than the old informal one. The key difference between RERA carpet and actual carpet area, also called net usable area, is that the latter excludes the area under the internal walls. Hence, the prescribed RERA carpet area will always be more than the actual one. In practice, the space you can lay a rug on is a little less than the RERA figure. (Piramal Realty)

A residential block with a private balcony on every floor - balconies sit outside RERA carpet area
Exclusive balconies, verandahs and open terraces are not part of RERA carpet area, but they have to be disclosed separately. Representative image, not the project.
Watch: why the RERA carpet figure is a little bigger than the floor you can actually use. “RERA Carpet Area Vs Actual Carpet Area | RERA carpet area calculation” by Housiey on YouTube, an independent channel not affiliated with this site. Watch on YouTube

Loading Factor: The Gap Between the Two

The difference between super built-up area and carpet area is called loading. The standard formula is:

Loading % = (Super built-up area − Carpet area) ÷ Carpet area × 100

So a home with 1,000 sq. ft. carpet and 1,300 sq. ft. super built-up has a loading factor of 30%. (Housing.com)

Loading in NCR has risen sharply. ANAROCK’s data puts NCR’s average loading at 31% in 2019 and 41% in Q1 2025, driven by bigger clubhouses and grander lobbies. There’s also no ceiling on it: “no regulation currently limits the loading factor in residential projects.” (ANAROCK data via NBM&CW)

Watch the wording. Some developers quote loading as a share of the super area instead, using Loading Factor = 1 − (Carpet Area ÷ Super Built-Up Area). The same flat can come out as “41%” one way and “29%” the other. Always ask which formula a quoted figure uses. (Provident Housing)

A residents' gym with free weights and machines - a common amenity counted in super built-up area
A rooftop swimming pool overlooking the city - shared amenities like this are what loading pays for
What loading pays for: the gym, the pool, the clubhouse, lobbies and lifts. You are billed a share of them in every sq. ft. you buy. Representative images, not the project.
Watch: how loading turns carpet area into the area on your price sheet. “Property Explained: What Is Loading Factor?” by NDTV (The Property Show) on YouTube, an independent channel not affiliated with this site. Watch on YouTube

What This Means at Prestige Sector 150 Noida

At Prestige Sector 150 Noida, the published sizes are super built-up figures. The price page says the areas are super built-up, not carpet area. The RERA agreement will state the carpet area. The indicative prices are ₹2.48 Cr* for the 1,303 sq ft 2 BHK and ₹2.80 Cr* for the 1,400 sq ft 3 BHK.

Until the carpet area is confirmed, you can estimate a range. The table below is an illustration only, not the project’s figures:

Illustrative carpet area and price per sq. ft. of carpet for the 1,303 sq. ft. super built-up 2 BHK at ₹2.48 crore, at three loading levels
Loading assumed2 BHK carpet (of 1,303 sq. ft.)₹ per sq. ft. of carpet (at ₹2.48 Cr*)
30%~1,002 sq. ft.~₹24,740
41% (NCR average)~924 sq. ft.~₹26,840
50%~869 sq. ft.~₹28,550

The headline rate is about ₹19,030 per sq. ft. of super area. Depending on loading, the rate per usable sq. ft. could be ₹24,740–28,550. That’s the number to compare across projects. Check the latest figures on the price page and the room sizes on the floor plans.

Same idea, other formula. Our residences page takes a more conservative view: carpet at 62–68% of super built-up. That is 32–38% loading measured on super area, or about 47–61% measured on carpet, and it puts the 2 BHK’s carpet at roughly 808–886 sq. ft.

How to Calculate Carpet Area from Super Built-Up Area

  1. Take the super built-up area, for example 1,400 sq. ft.
  2. Divide by (1 + loading). At 41%, that’s 1,400 ÷ 1.41 ≈ 993 sq. ft. of carpet.
  3. Divide the price by the carpet area. ₹2.80 crore ÷ 993 ≈ ₹28,200 per sq. ft. of carpet.

Run the same steps for every project on your shortlist. A lower headline rate with heavy loading can cost you more per usable sq. ft. than a higher rate with light loading.

Why the Difference Matters Beyond Price

  • Monthly maintenance. Many societies bill maintenance on super area, so a high loading raises your bill every month.
  • Fair comparisons. Comparing one project’s super area with another’s carpet area makes the second look far worse value than it is.
  • Furniture and interiors. Your sofa, wardrobes and bed have to fit the carpet area, not the brochure figure.
  • Resale listings. Portals often show super area, so check the carpet area before you compare prices.
A furnished apartment living room - the sofa, chairs and tables all have to fit inside the carpet area
The sofa, the dining table and the wardrobes are planned on carpet area, not on the brochure figure. Representative image, not the project.

How to Check Before You Pay

  • RERA filing: Look up the project on the UP RERA portal once it’s registered. Prestige Sector 150’s registration is still under process.
  • Agreement for sale: Make sure it states the carpet area as defined under RERA.
  • Balconies and terraces: Get their areas listed separately. RERA requires mandatory disclosure of balcony and terrace areas, and they aren’t part of carpet area. (CaseMine)
  • Room dimensions: Ask for room-by-room measurements, not just one total.
  • At possession: Measure the flat, or have it measured, before you take handover.

Our Prestige Sector 150 buyer’s guide covers the rest of the due diligence. If you’re still weighing formats, read villa vs flat in Sector 150 Noida.

A buyer reading and signing a property agreement - the document that must state the RERA carpet area
The agreement for sale is where the RERA carpet area becomes binding. Read that line before you sign. Representative image.

FAQs

1. What is the difference between super built-up area and carpet area?

Carpet area is the usable floor space inside your home, including internal walls. Super built-up area adds the external walls, balconies and your share of common areas such as lobbies, lifts, staircases and the clubhouse.

2. What is carpet area as per RERA?

It is the net usable floor area of an apartment, including internal partition walls. It excludes external walls, service shafts, exclusive balconies or verandahs, and exclusive open terraces.

3. What is a normal loading factor in Noida?

ANAROCK puts NCR’s average loading at 41% in Q1 2025, up from 31% in 2019. No law caps it, so it varies from project to project.

4. How do I calculate carpet area from super built-up area?

Divide the super built-up area by 1 plus the loading. For example, 1,400 sq. ft. at 41% loading is 1,400 ÷ 1.41, or about 993 sq. ft. of carpet.

5. Is the price at Prestige Sector 150 quoted on carpet or super area?

On super built-up area. The carpet area will be stated in the RERA agreement.

6. Is balcony area included in carpet area?

No. RERA excludes exclusive balconies, verandahs and open terraces from carpet area, but they must be disclosed separately.

7. Why is RERA carpet area bigger than the “actual” carpet area?

RERA carpet area includes the area under internal partition walls. The usable area you can actually furnish excludes those walls, so it’s a little smaller.

8. Can the carpet area change after booking?

It can change by the time the building is finished. Check that your agreement states the carpet area and explains what happens if the final area is different.

Conclusion

On super built-up area vs carpet area, the headline rate is only half the story. The super area tells you what you’re billed for. The carpet area tells you what you can live in. In NCR, where loading now averages about 41%, the gap is large enough to change which project is better value. Work out the price per sq. ft. of carpet before you compare, and get the carpet area in writing before you pay.

To get the confirmed carpet areas and cost sheet once RERA approval comes through, contact us or call +91 9818359913.

*This site is run by a channel partner and is not the developer’s official website. Figures are indicative and subject to confirmation at UP RERA registration, which is under process. The carpet area estimates above are illustrations, not project data.

Keep comparing

Call NowChat on WhatsApp